SR EVO-X FRONT VENTURI SPLITTER & FLAT FLOOR [PORSCHE 992 GT3 RS]
Hilights:
- Increased front axle downforce by 95 kg/210 lbs(@285 Km/h or 177 MPH) and enhanced drivability.
- Style inspired by the iconic Porsche 911 RSR race car.
- Genuine motorsport design with raised leading edge for optimized Venturi effect.
- Extended full flat-floor cover for improved Venturi effect in the middle and rear sections.
- One-piece construction in aerospace-grade dry carbon fiber - strong, lightweight, and no support cables required.
- Quick and easy slide-on installation.
- Lightweight sliders for renewable protections.
Application:
- Porsche 992 GT3 RS
Não foi possível carregar a disponibilidade de recolha
INSPIRED BY THE ICONIC 911 RSR
NOT ONLY LOOKS LIKE RSR, BUT ALSO PERFORMS LIKE RSR
SR Venturi Splitter applied the same Genuine motorsport design as RSR featuring a raised leading edge and extended full flat floor.
VENTURI EFFECT SPLITTER WITH RAISED LEADING EDGE
The SR Venturi Splitter applies the raised-leading-edge design that is standard in top-level GT racing, delivering cleaner airflow, stronger and more stable front downforce, and better clearance for daily driving, and several more benefits.
Core Benefits:
Increased Front Downforce
Generates additional front-end downforce by optimizing airflow under the splitter, improving high-speed grip and turn-in response.
Stable Front Balance
Minimizes aerodynamic balance shift during braking and pitch changes, keeping the car more predictable and composed.
Consistent Venturi Effect
Helps maintain attached underbody airflow across varying ride heights and attitudes, delivering more progressive and reliable downforce.
Improved Driveability
Provides strong high-speed front grip without the nervous or peaky behavior often seen with aggressive flat splitters, making the car more confidence-inspiring on track.
Better Ground Clearance for Daily Driving
The raised leading edge sits higher off the road, so you get fewer ground strikes and less scraping on driveways, speed bumps and kerbs.
EXTENDED FULL FLAT-FLOOR COVERAGE
Following a technical best practice of modern racing, as used on top-level GT3 race cars, the SR Venturi Splitter extends into a full flat floor that covers the uneven factory underbody, maximizing the Venturi effect across the entire underbody.
Core Benefits:
Stronger Venturi Effect Across the Underbody
Accelerates airflow from the front splitter through the middle section to the rear, creating a continuous low-pressure zone that maximizes the Venturi effect across the entire underbody.
More Downforce with Minimal Drag Penalty
Feeds cleaner, faster airflow to the underbody and rear diffuser, significantly increasing total downforce and improving front-to-rear aero balance. Reduced underbody turbulence means the extra downforce comes without a proportional increase in drag.
REPLACEABLE LIGHTWEIGHT SKID BLOCKS
Spec-matched to genuine GT3 race-car material for authentic durability and weight. Built for repeated track use and economical replacement.
QUICK & EASY SLIDE-ON INSTALLATION
Slide-on, Bolts-up, Ready to Race!
ENJOY UPGRADING YOUR GT3 RS, STEP BY STEP
Unlike most porsche performance kit brands that only sell complete kits, SilverRocket lets you upgrade your GT3 RS one part at a time. Because aero balance is key to a safe upgrade, we're releasing this Aero Balance Table for the SR 992.1 GT3 RS EVO-X Kit, just as we did for our GT4 RS kit, so you can see how each combination of parts affects your car in high-speed corners.
Aero Balance Table of SilverRocket EVO-X Parts Combination
for Porsche 992.1 GT3RS
| SR Aero Parts Combination | Car Behavior During High Speed Turning | ||||||
|---|---|---|---|---|---|---|---|
| Front Aero Parts | Rear Aero Parts | Severe OverSteer |
Moderate OverSteer |
Neutral | OEM Balance (UnderSteer) |
Moderate UnderSteer |
Severe UnderSteer |
| OEM Standard | OEM Standard | X | |||||
| SR Tri-Diveplanes | OEM Standard | X | |||||
| SR Front Venturi Splitter | OEM Standard | X | |||||
| SR Front Venturi Splitter + SR Tri-Diveplanes |
OEM Standard | X DANGER | |||||
| SR Front Venturi Splitter | SR DuckTail | X | |||||
| SR Front Venturi Splitter | SR 3-ELEMENTS-Wing +SR DuckTail |
X | |||||
| SR Front Venturi Splitter | SR 3-ELEMENTS-Wing +SR DuckTail +SR Ultra Venturi Diffuser |
X | |||||
| SR Front Venturi Splitter | SR DuckTail +SR Ultra Venturi Diffuser |
X | |||||
| SR Front Venturi Splitter + SR Tri-Diveplanes |
SR 3-ELEMENTS-Wing +SR DuckTail |
X | |||||
| SR Front Venturi Splitter + SR Tri-Diveplanes |
SR 3-ELEMENTS-Wing +SR DuckTail +SR Ultra Venturi Diffuser |
X | |||||
| SR Front Venturi Splitter + SR Tri-Diveplanes |
SR DuckTail +SR Ultra Venturi Diffuser |
X | |||||
| SR Tri-Diveplanes | SR DuckTail | X | |||||
| SR Tri-Diveplanes | SR 3-ELEMENTS-Wing | X | |||||
| SR Tri-Diveplanes | SR Ultra Venturi Diffuser | X | |||||
| OEM Standard | SR DuckTail | X | |||||
| OEM Standard | SR 3-ELEMENTS-Wing | X | |||||
| OEM Standard | SR Ultra Venturi Diffuser | X | |||||
F1 Track Tested
All SilverRocket performance products are rigorously tested on the renowned Shanghai International Circuit, a premier F1 circuit and ningbo International circuit, a FIA-2 level circuit.
More Customer Vehicles
Porsche Drivers Trust SilverRocket




















