RACESENSE TIRE GAUGE WITH TIRE PROBE/PYROMETER & PROTECTIVE RUBBER CASE [FASTMATE RACING]
The RaceSense Tire Pressure Gauge has been designed to save you time in the pits and on the track.
Tire pressures are critical to performance but the majority of gauges can be out by 1 to 2 psi or more. We’ve designed an accurate high-quality rugged gauge used in the highest echelons of motorsport. As well as precision measurement it has some unique functions, including saving all your data to an app so you always have tire data to hand.
- Accuracy better than +/-0.1 psi
- Rugged metal case and water resistant
- Normal Gauge & fast Multi-Tire modes
- Sync to iPhone, Android or computer
- Optional fast response thermocouple for temperature sensing
Não foi possível carregar a disponibilidade de recolha
Accurate
RaceSense is designed to be very precise. Measurements are typically accurate to less than 0.1 psi and the gauge is sensitive to pressure variations down to 0.01 psi.
- Accurate to 0.1 psi
- Range 4 to 150 ps
- Switch between psi, bar, kPa or kg/cm2
- Automatic tire mode records initial pressures (max) and adjusted pressures
- Ambient temperature and barometric pressure
- Plug in our fast response type K thermocouple tire probe for temp readings too
Multi-tire mode
RaceSense has a multi-tire mode which is a real game changer for quick pit stops. There is no need to remember or write down pressures, RaceSense will save everything for you.
- Record pressures on all tires without pressing any buttons
- Starting tire and direction can be preset (anticlockwise/clockwise)
- 2 or 4 tyre mode
- Record tyre temperatures (inner, middle, outer per tyre) and track temperature with thermocouple probe
- Set vehicle number, tyre set number
- Label as Hot/Cold, Session name and more
- 7 Presets available for easy change between vehicles
And temperature too
We have developed a fast response, adjustable accurate temperature probe (pyrometer) to go with RaceSense. The probe is low thermal mass which won’t act as a heat sink to skew your readings.
- Quick response: After insertion it typically takes 2 seconds for the probe to reach 90% of the final temperature, 3 seconds for 95% and 4 seconds + for the temperature response to level out. The gauge even shows Up or Down arrows if the temperature is changing.
- Adjustable depth: There is a screw adjuster and locking nut so that the tyre can be probed at a consistent depth. A depth of between 3 and 5mm is recommended. The probe can be adjusted up to 15mm which will puncture most tyres. To avoid punctures the needle should obviously not be inserted too deep and the probe should be inserted into the tyre blocks only and not the grooves/voids or sides. Take care with very worn tyres.
- Avoid heat sources: Temperature accuracy will be affected if e.g. the gauge or probe are heated (or cooled). So, do not leave the gauge and probe near sources of heat or where large thermal gradients may be expected e.g. in direct sunlight, on top of engine, near heaters or fans etc.
sync to your phone
Racesense TIre Gauge has a built in phone link, tap to your phone and view the data in the app. No pairing is needed and the upload takes less than a second.- Shows maximum and adjusted pressures for each tire- Temperatures from inner, middle and outer of each tire, track and ambient temperature- Auto-senses GPS location when downloading- Auto-senses weather conditions, atmospheric pressure, wind speed and wind direction- Add notes, edit, add vehicle and tire set number, session labels- Analyse and compare hot and cold runs- Share individual or all records by sms/whatsapp/email
Design for the rigors of track life
- Die-cast powder-coated aluminum case
- Tire chuck is a secure and quick fit
- Brass bleed valve lets you precisely adjust your pressures.
- Polycarbonate screen
- Stainless steel belt clip
- Water resistant- Buttons are rubber sealed
- Sunlight readable OLED display.
keep your pressure secret
Use OFFSET MODE to input your desired pressures beforehand. RaceSense will show the offset from these values rather than actual pressures on the screen.Just adjust until you reach zero and no one will know what pressures you are running!
Design for the rigors of track life
- Program preset settings easily via the PC
- Set units
- Set number of presets
- Set labels- Transfer to gauge by USB
- Reprogram firmware
